Doorview fire door inspections

FDI Report Builder

FIRE DOOR INSPECTION – REPORT BUILDER PROJECT DETAILSBuilding Title* Building Address* Company* […]

Fire Door Inspections

Every building owner, with the exception of domestic housing, is required by […]

Fire Door Inspection Report Builder

Main picture of door
Make sure image is portrait.
Door No.*
Description
Door Type
Door Leaf Size
Door Faults
Other door faults
Door fault picture 1
Door fault picture 2
Door fault picture 3
Recommended Action*
- Remedial work required.
- Replace the complete doorset.
- Replace the complete doorset if no certification can be supplied for this assembly.
- Pass - No action required.
Phone
This field is for validation purposes and should be left unchanged.

Save and Continue Later

- Hinges worn and leaking and should be considered for replacement.
- New hinges have been installed. Old hinge mortice not filled or filled with unknown material.
- Hinges not CE Marked.
- Door leaf has dropped on the hinge.
- Non fire rated hinges installed and should be replaced.
- Incorrect number of hinges fitted.
- Hinge fixing screws missing. Fit missing screws.
- Old roller catch taken out. Frame and/or door not repaired adequately.
- Old lock taken out. Hole filled with unknown material.
- Door frame stop not a certified assembly.
- Build up of wall and frame on leading edge of door is hollow. Suspect that it is not compliant to fire standards.
- The gap between the door and frame exceeds 4mm.
- The gap between the door and frame exceeds 4mm. Adjustment required.
- The gaps between the door and frame are too big to rectify through adjustment. Replace door.
- The gap under the door is beyond the recommended limit for a fire door. Adjustment required.
- The gap between the door and the head of the frame is beyond the recommended limit for a fire door. Adjustment required.
- The door assembly is not as per the profile manufacturers details or the suppliers production drawings. Individual test evidence would be required for the door assembly that is currently in situ.
- The fire performance of the overall doorset system cannot be confirmed as evidence of the fire performance was not available i.e. no manufacturers details present.
- The door frame has not been suitably sealed to the structure, visible in the head above the architrave. Fire stopping measures are required.
- The door frame leg sections are not correct for the structural opening as they do not reach the floor. The floor section needs remedial work and fire stopping measures are required.
- The door frame build up is not as per the production drawings. A subframe has been assembled to which the frame is fixed meaning the doorset is not fixed directly to the structure. Evidence of this assembly method would need to be produced to comply with the fire test evidence.
- Damage/hole to door/frame.
- Plate covering hole invalidating fire rating.
- Door frame fixings missing in places.
- Mix of seal types. This should be consistent.
- Smoke seal is damaged in places.
- Intumescent/smoke seal missing in places.
- Intumescent/smoke seal build up is stopping the door from closing into place.
- The intumescent is loose in places and should be secured or replaced.
- Intumescent strip placed on top of intumescent strip is not an acceptable application on a fire door.
- We have presumed the intumescent/smoke seal have been retrospectively fitted and is not part of the original assembly. No certification would be in place for this assembly.
- Door closer is leaking oil.
- Door closer is not CE marked.
- Door leaves do not sit flush together in the closed position. Adjustment required.
- Door leaf not sitting flush in frame.
- Door leaf not closing fully.
- Door leaf not latching closed. Adjustment required.
- Door leaf damaged due to hitting the door stop at force.
- Glazed door not fire rated.
- Glazing held in place with mastic. Not acceptable.
- Glazing bead loose in places.
- Vision panel beading loose and should be pinned.
- Unmarked Georgian wired glass installed and there is no evidence of an intumescent gasket installed.
- Steel plates added to meeting styles to close gap between leaves. Fire evidence would need to be required of this assembly.
- Fire signage missing or incorrect.
- Door closer would appear to be Mechanically Hold Open closer, which is not acceptable on a fire door. Electromagnetic hold open closers should be linked to the fire alarm.
- Door closer channel loose. This will eventually result in the door closer failing.
- Door closer disconnected.
- Perko door closer is not CE Marked.
- Door closer fitted incorrectly which inhibits the door from closing. Adjust or replace.
- Pull handle loose. Fixings should be tightened.
- Door stop required.
- Door wedged open. This is not allowed under fire regulations.